diff --git a/Stingray-Phone-Tracker.md b/Stingray-Phone-Tracker.md
new file mode 100644
index 0000000..646b36c
--- /dev/null
+++ b/Stingray-Phone-Tracker.md
@@ -0,0 +1,7 @@
+<br>The StingRay is an IMSI-catcher with both passive (digital analyzer) and lively (cell-site simulator) capabilities. When working in active mode, the system mimics a wireless service cell tower with the intention to power all close by cell phones and different cellular data devices to hook up with it. Hand-carried variations are referred to below the commerce identify KingFish. In lively mode, the StingRay will drive every suitable cellular device in a given space to disconnect from its service supplier cell site (e.g., operated by Verizon, AT&T, and so on.) and set up a new reference to the StingRay. Normally, this is completed by having the StingRay broadcast a pilot sign that's both stronger than,  [iTagPro geofencing](http://rudavision.com/bbs/board.php?bo_table=free&wr_id=1355566) or made to seem stronger than, the pilot alerts being broadcast by official cell sites working in the world. A typical perform of all cellular communications protocols is to have the cellular system connect to the cell site offering the strongest signal. StingRays exploit this function as a way to drive temporary connections with cellular gadgets inside a restricted area.<br>
+
+<br>Throughout the technique of forcing connections from all compatible cellular units in a given space, the StingRay operator needs to find out which machine is the desired surveillance goal. This is completed by downloading the IMSI,  [iTagPro device](https://docs.brdocsdigitais.com/index.php/New_Research_Evaluates_Accuracy_Of_Sleep_Trackers) ESN, or other figuring out information from each of the devices related to the StingRay. On this context, the IMSI or equal identifier will not be obtained from the cellular service supplier or from any other third-party. The StingRay downloads this data straight from the system using radio waves. In some instances, the IMSI or equivalent identifier of a target system is thought to the StingRay operator  [iTagPro geofencing](https://forums.vrsimulations.com/wiki/index.php/Critical_Analysis_Of_Tracking_Devices_In_Student_ID_Cards) beforehand. When this is the case, the operator will obtain the IMSI or equivalent identifier from each gadget as it connects to the StingRay. When the downloaded IMSI matches the known IMSI of the desired target, the dragnet will finish and the operator will proceed to conduct particular surveillance operations on just the target gadget.<br>
+
+<br>In different cases, the IMSI or equal identifier of a goal is just not identified to the StingRay operator and the goal of the surveillance operation is to identify a number of cellular devices being utilized in a identified area. StingRay can be utilized to download the IMSI or  [iTagPro geofencing](https://confrerie-fraisedecarpentras.fr/winter-travel-guide/) equivalent identifier from every telephone inside the protest area. After figuring out the phones, locating and tracking operations will be carried out,  [iTagPro geofencing](https://freekoreatravel.com/index.php/User:AugustaDetwiler) and service providers could be forced to turn over account data figuring out the phone customers. Cellular telephones are radio transmitters and receivers, much like a walkie-talkie. However, the cellphone communicates solely with a repeater inside a nearby cell tower set up. At that set up, the device takes in all cell calls in its geographic area and  [wireless item locator](https://www.new.jesusaction.org/bbs/board.php?bo_table=free&wr_id=688444) repeats them out to other cell installations which repeat the alerts onward to their vacation spot telephone (either by radio or landline wires). Radio is used additionally to transmit a caller's voice/data again to the receiver's cellular phone.<br>
+
+<br>The 2-approach duplex cellphone dialog then exists by way of these interconnections. To make all that work accurately, the system permits computerized will increase and decreases in transmitter power (for the individual mobile phone and for  [iTagPro geofencing](https://famouscreationsca.com/avatarguy1/) the tower repeater, too) so that solely the minimal transmit power is used to finish and  [iTagPro smart device](https://www.loschilcosdeliquine.cl/index.php/2017/02/02/ubicacion/) hold the call energetic, "on", and  [iTagPro technology](https://wikirefuge.lpo.fr/index.php?title=Health_Sensors_Misconstrued_As_Government_Tracking_%E2%80%98Microchips%E2%80%99) permits the customers to listen to and be heard repeatedly in the course of the conversation. The aim is to hold the decision lively however use the least amount of transmitting energy, primarily to conserve batteries and be efficient. The tower system will sense when a cell phone isn't coming in clearly and can order the cellular phone to boost transmit energy. The person has no management over this boosting
\ No newline at end of file